Galaxy V2 - Purple Burst

Body: Mahogany

Top: Flame Maple

Color: Purple Burst

Neck: Flame Maple

Truss Rod: 2 Way Stainless Steel Heel Adjustable

Carbon Fiber Rods: Yes

Fretboard: Roasted Flame Maple

Inlays: Black Mother of Pearl

Side Markers: Luminlay Green

Frets: 24 Jescar Jumbo Stainless Steel

Scale Length: 25.5"

Nut: Graph Tech Black TUSQ XL

String Trees: Graph Tech Black TUSQ

Tuners: Hipshot Black Grip Lock Open Gear Locking Tuners 18:1 ratio

Bridge: Hipshot Black 6 String Fixed Guitar Bridge

Pickups: Bareknuckle Aftermath

Controls: 1 Volume W/Coil Split, 1 Tone, 3 Way Toggle

Knobs: Gotoh Black Dome Top

Output Jack: Recessed Black

Strap Locks: Grover Black

Daily/Post-Play Care:

Wipe Down:
* Use a clean, soft, lint-free microfiber cloth to wipe down the entire guitar, including the strings, neck, and body.
* Pay extra attention to the fretboard, as sweat and oils can accumulate there.
Storage:
* Store your guitar in a hard case when not in use.
* If using a stand, ensure it's stable and in a safe, temperature-controlled environment.

Regular Maintenance:

String Cleaning and Replacement:
* Clean strings regularly with a dedicated string cleaner or a clean cloth.
* Replace strings when they sound dull or feel rough.

Body Cleaning and Polishing:

(Polyurethane Finish):
* Use a fine microfiber cloth to wipe down the guitars finish
* Avoid abrasive cleaners or polishes that could scratch the finish.
* Do not use any alcohol based cleaners or harsh chemicals

Maple Fretboard Cleaning:

* Do not use lemon oil
* To clean it, use a slightly damp cloth to remove dirt and grime.
* Avoid using excessive moisture, as it could seep under the finish and cause damage.
* If needed, apply a small amount of boiled linseed oil being careful not to drip onto the guitar body or neck. Wipe into the fretboard and let stand for 15 minutes. Wipe off the excess.

Richlite Fretboard cleaning:

Understanding Richlite:
* Richlite is a composite material made from resin-infused paper. This makes it very different from traditional wood fretboards.
* Because of its composition it is very durable, and not as porous as wood.
* This means it's less susceptible to absorbing dirt and moisture.
Cleaning Steps:
* Gentle Wiping:
* For routine cleaning, a simple damp cloth is often sufficient. Use lukewarm water.
* Wipe down the fretboard, paying attention to areas where dirt and grime tend to accumulate.
* Ensure you wipe away any moisture residue with a clean cloth.

* Tools:

* If you need to scrape off built-up grime, use a soft plastic tool to avoid scratching the Richlite. A popsicle stick can work well.

* Things to Avoid:

* Avoid using harsh chemicals or abrasive cleaners, as these could potentially damage the fretboard.
* Oiling is not necessary for Richlite fretboards, unlike traditional wood fretboards.

Key Considerations:

* Richlite is quite resilient, so you don't need to be overly cautious. However, it's always best to use gentle cleaning methods.
* Regular, light cleaning is preferable to infrequent, heavy cleaning.

Hardware Maintenance:

* Check tuning pegs, bridge, and other hardware for loose screws or parts.
* Clean metal parts with a dry cloth to prevent corrosion.

Environmental Considerations:

* Temperature and Humidity:
* While polyurethane is relatively resistant to environmental changes, it's still important to avoid extreme temperature and humidity fluctuations.
* Keep your guitar away from direct sunlight, heaters, and air conditioners.
* Although maple is a hard wood, large swings in humidity can still cause issues.

* Humidity levels:

* While a polyurethane finish protects the wood, extreme dryness can still cause issues with the neck. Keeping the humidity levels within a reasonable range, between 40%-60% is always recommended.
Important Notes:
* Avoid using harsh chemicals or abrasive cleaners on any part of your guitar.
* When cleaning the fretboard, avoid getting moisture under the finish.
* If you notice any cracks or damage to the finish, consult a professional luthier.
* When cleaning the guitar, never spray cleaning products directly onto the instrument. Always spray the product onto the cleaning cloth.