This is a made to order guitar, not an in stock guitar. When purchasing you will receive the spec listed. Build time is approximately 8 weeks.
Dark Matter - Xeno Green
Dark Matter - Xeno Green
The Dark Matter – Xeno Green is a precision-engineered metal instrument built for maximum tension, clarity, and control under extreme conditions. Designed as a fully realized, highest-spec guitar, Dark Matter prioritizes stability, accuracy, and relentless low-end response—without compromise.
Inspired by biomechanical menace, hostile environments, and predatory efficiency, Xeno Green represents Dark Matter at its most unforgiving. Every detail is intentional, resulting in a guitar that feels dense, locked-in, and oppressive in the best way possible—built to maintain precision under pressure and dominate when conditions turn hostile.
Built to Soleil’s highest specification, Dark Matter features a black walnut body paired with a quilted maple top, delivering a tight, focused low end, aggressive midrange presence, and controlled high-frequency response that stays articulate under extreme gain. A flame maple neck, reinforced with carbon fiber rods and secured by a two-way stainless steel heel-adjust truss rod, provides exceptional rigidity and long-term stability for high-tension and touring use.
The neck is shaped with Soleil’s custom asymmetrical C–D profile, featuring a fuller C on the bass side and a flatter D on the treble side. This geometry follows the natural mechanics of the hand, giving the thumb a solid anchor for fast, controlled picking and fluid legato while keeping the fretting hand relaxed. The result is reduced fatigue paired with the stiffness required for aggressive playing and extended-range tension.
A Richlite fretboard, 24 Jescar jumbo stainless steel frets, and multiscale 25.5”–26.5” length create a fast, durable playing surface optimized for low-tuned clarity, accurate intonation, and long-term consistency. Luminlay green side markers ensure visibility on dark stages, while abalone inlays add a restrained but striking visual contrast.
Hardware is stripped down and uncompromising. A Hipshot gold headless system paired with a Hipshot gold headless solo bridge maximizes balance, sustain, and tuning stability while eliminating unnecessary mass. A Graph Tech Black TUSQ XL nut, Grover gold strap locks, recessed gold hardware, and gold knobs with abalone inlay complete a setup built for real-world performance and road reliability.
Electronics are brutally precise. A matched Bare Knuckle Aftermath pickup set with gold bobbins delivers immediate attack, tight low-end response, and aggressive midrange definition with exceptional note separation under extreme gain. Designed for modern metal, the Aftermath set remains articulate and controlled at low tunings and high saturation.
Controls are direct and functional: 1 volume with coil split and a 3-way blade switch, wired for durability, clarity, and consistency.
The Specs listed below are the default for this particular model
Specs
Specs
Body: Black Walnut
Top: Quilted Maple
Color: Xeno Green
Neck: Flame Maple
Fretboard: Richlite
Inlays: Abalone
Side Markers: Luminlay Green
Scale Length: 25.5" - 26.5"
Frets: 24 Jescar Jumbo Stainless Steel
Carbon Fiber Rods: Yes
Truss Rod: 2 Way Stainless Steel Heel Adjustable
Headpiece: Hipshot Gold Headless
Bridge: Hipshot Gold Headless Solo Guitar Bridge
Pickups: Bareknuckle Aftermath Gold covered
Knobs: Gold W/Abalone Inlay
Controls: 1 Volume W/Coil Split, 3 Way Blade Switch
Output Jack: Recessed Gold
Strap Locks: Grover Gold
Care Guide
Care Guide
Daily/Post-Play Care:
Wipe Down:
* Use a clean, soft, lint-free microfiber cloth to wipe down the entire guitar, including the strings, neck, and body.
* Pay extra attention to the fretboard, as sweat and oils can accumulate there.
Storage:
* Store your guitar in a hard case when not in use.
* If using a stand, ensure it's stable and in a safe, temperature-controlled environment.
Regular Maintenance:
String Cleaning and Replacement:
* Clean strings regularly with a dedicated string cleaner or a clean cloth.
* Replace strings when they sound dull or feel rough.
Body Cleaning and Polishing:
(Polyurethane Finish):
* Use a fine microfiber cloth to wipe down the guitars finish
* Avoid abrasive cleaners or polishes that could scratch the finish.
* Do not use any alcohol based cleaners or harsh chemicals
Maple Fretboard Cleaning:
* Do not use lemon oil
* To clean it, use a slightly damp cloth to remove dirt and grime.
* Avoid using excessive moisture, as it could seep under the finish and cause damage.
* If needed, apply a small amount of boiled linseed oil being careful not to drip onto the guitar body or neck. Wipe into the fretboard and let stand for 15 minutes. Wipe off the excess.
Richlite Fretboard cleaning:
Understanding Richlite:
* Richlite is a composite material made from resin-infused paper. This makes it very different from traditional wood fretboards.
* Because of its composition it is very durable, and not as porous as wood.
* This means it's less susceptible to absorbing dirt and moisture.
Cleaning Steps:
* Gentle Wiping:
* For routine cleaning, a simple damp cloth is often sufficient. Use lukewarm water.
* Wipe down the fretboard, paying attention to areas where dirt and grime tend to accumulate.
* Ensure you wipe away any moisture residue with a clean cloth.
* Tools:
* If you need to scrape off built-up grime, use a soft plastic tool to avoid scratching the Richlite. A popsicle stick can work well.
* Things to Avoid:
* Avoid using harsh chemicals or abrasive cleaners, as these could potentially damage the fretboard.
* Oiling is not necessary for Richlite fretboards, unlike traditional wood fretboards.
Key Considerations:
* Richlite is quite resilient, so you don't need to be overly cautious. However, it's always best to use gentle cleaning methods.
* Regular, light cleaning is preferable to infrequent, heavy cleaning.
Hardware Maintenance:
* Check tuning pegs, bridge, and other hardware for loose screws or parts.
* Clean metal parts with a dry cloth to prevent corrosion.
Environmental Considerations:
* Temperature and Humidity:
* While polyurethane is relatively resistant to environmental changes, it's still important to avoid extreme temperature and humidity fluctuations.
* Keep your guitar away from direct sunlight, heaters, and air conditioners.
* Although maple is a hard wood, large swings in humidity can still cause issues.
* Humidity levels:
* While a polyurethane finish protects the wood, extreme dryness can still cause issues with the neck. Keeping the humidity levels within a reasonable range, between 40%-60% is always recommended.
Important Notes:
* Avoid using harsh chemicals or abrasive cleaners on any part of your guitar.
* When cleaning the fretboard, avoid getting moisture under the finish.
* If you notice any cracks or damage to the finish, consult a professional luthier.
* When cleaning the guitar, never spray cleaning products directly onto the instrument. Always spray the product onto the cleaning cloth.
This is a custom order and will be made for you after payment. This guitar is not in stock. Your build time is approximately 8 weeks.
Financing available at checkout
Không thể tải khả năng nhận hàng tại cửa hàng
Share
Care Guide
Care Guide
